Skip to content

eu.cuttingtoolsai/reference

by cuttingtoolsai.eu · remote · no sign-in to list tools · v1.0.0 · published by eu.cuttingtoolsai

Brand-neutral cutting tool reference: grade cross-reference, materials, turning starting values.

Changes · 3
CompareRegistry entry

3 tools: 3 change things.

Scanned Oct 21, 2026

No check matched anything in the tool definitions. No finding is not a safety guarantee. How the checks work.

claude mcp add --transport http reference https://cuttingtoolsai.eu/mcp

Tools

Open a tool for its reasons and full description. Descriptions are the publisher's own words, shown as they are.

3 tools

Changes things 3Claude Code: ask
  • grade_cross_referenceCross-reference a carbide insert grade across manufacturers.No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    Description, as the server wrote it
    Cross-reference a carbide insert grade across manufacturers. Given any maker's grade (e.g. GC4325, KC5010, IC807), returns its ISO 513 application position(s) and the grades other manufacturers publish at the same position, each row carrying its verification status (multi-source consensus / confirmed by 2+ manufacturer charts / single-source chart). Comparable-at-ISO-position is a trial starting point, not an interchangeability guarantee.
  • material_cross_referenceCross-reference a workpiece material designation across standards (EN, Werkstoffnummer, AISI/ASTM/UNS, JIS) from a curated 77-material set, e.g.No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    Description, as the server wrote it
    Cross-reference a workpiece material designation across standards (EN, Werkstoffnummer, AISI/ASTM/UNS, JIS) from a curated 77-material set, e.g. "1.4404" -> AISI 316L / X2CrNiMo17-12-2 / SUS316L. Each match includes the ISO 513 machining group, a machining note, and whether the pairing is a same-composition equivalent or a nearest commonly-cited counterpart. Always verify against the material certificate.
  • speeds_feeds_starting_valuesStarting cutting-speed and feed ranges for coated-carbide TURNING by ISO 513 material group (P steel, M stainless, K cast iron, N aluminium, S_TI titanium, S_NI nickel superalloy, …No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    Description, as the server wrote it
    Starting cutting-speed and feed ranges for coated-carbide TURNING by ISO 513 material group (P steel, M stainless, K cast iron, N aluminium, S_TI titanium, S_NI nickel superalloy, H hardened steel). These are deliberately wide practice ranges, not from any one catalog; the maker's data for the exact grade always wins.

This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.

Install

Pinned to version 1.0.0. Values in angle brackets are yours to fill in.

claude mcp add --transport http reference https://cuttingtoolsai.eu/mcp

Run in a terminal.

Claude Code permissions

Allow the reads, ask before a change, deny the deletes. Paste into .claude/settings.json.

.claude/settings.json
{
  "permissions": {
    "allow": [],
    "ask": [
      "mcp__reference__grade_cross_reference",
      "mcp__reference__material_cross_reference",
      "mcp__reference__speeds_feeds_starting_values"
    ],
    "deny": []
  }
}

Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. It assumes the server is installed as reference. Review it before you use it.